Paradyme

Paradyme

Panamax® MAX Image Pro LT 20 Amp

Model #: MIP-20LT

At a Glance

Panamax® MAX Image Pro LT 20 Amp with noise filtration and automatic voltage monitoring

WarningProposition 65 Warning for California Residents
Panamax® MAX Image Pro LT 20 Amp

General Specs

Product Weight (lbs.)4.5
Depth (in.)4.75
Width (in.)10.25
Height (in.)2.5
Number Of Outlets2
Joule Rating1650
Cord Length (Ft)8
Manufacturer WarrantyLimited Lifetime

Panamax® MAX Image Pro LT 20 Amp

Model #: MIP-20LT
198733
Model #: MIP-20LT
Panamax
$99,999.00

Available in Store Only

At a Glance

Panamax® MAX Image Pro LT 20 Amp with noise filtration and automatic voltage monitoring

Get to know this product.

Firewall For Noise™ Circuitry

This technology provides enhanced Neutral-to-Ground Noise Filtration for your digital office equipment. EMI/RFI noise can contaminate the equipment safety ground, which in turn will contaminate the connected digital equipment, and prevent it from operating at peak performance levels.

GFCI Compatibility

This circuit features an improved 2-stage common-mode architecture that provides compatibility for GFCI's per NEC article 250.6. Complies with UL 1283: Electromagnetic Interference Filters.

Noise Filtration

Circuitry prevents EMI/RFI noise from contaminating the connected digital equipment through the ground wiring.

Automatic Voltage Monitoring (AVM)

This power monitoring system acts as a gate to prevent unsafe voltages from damaging sensitive electronic equipment. It automatically detects a prolonged over-voltage or under-voltage and disconnects the power to the connected equipment, then reconnects it when the power returns to a safe level. It even protects the MIP-20LT unit.

SignalPerfect™ Telephone Line Protection

RJ-11 phone jacks are available to protect a single-line telephone modem (pins 4,5 protected) with fuseless Auto-Resetting technology and optimized circuitry to ensure a clean, clear signal.

Wiring Faulty Safety Shutoff

This technology will detect a mis-wired wall receptacle or an open-ground by monitoring the voltage between neutral and ground. If an unsafe condition exists, the MIP-20LT will disconnect the power from the connected equipment.

CAT5E Ethernet LAN Protection

RJ-45 jacks are available to protect one Ethernet 10/100/1000BASE-T network connection (all pins protected). 

Panamax MIP-15LT  Features at a Glance

 

    AVM (Automatic Voltage Monitoring) - Protects equipment against prolonged over/ under voltages by disconnecting the power and reconnecting it when safe power returns. 

    Separate protection circuits for 10/100/1000 BaseT Ethernet and telephone. 

    CAT5e LAN Protection In/Out RJ-45 bi-directional connectors 

    Unsafe Power Indicator light 

    Line Fault Indicator light 

    Ground OK Indicator light 

    Power/Filtration OK Indicator light 

    Three-stage, GFCI Compatible filter circuit provides high levels of Normal and Common mode EMI/RFI noise filtration. 

    Surge Protection - Exclusive Protect or Disconnect™ circuitry. In the event of a catastrophic surge such as lightning, it completely disconnects AC power to connected equipment 

    Eight foot power cord 

    Two rubber strips running the length of the product provide a non-slip grip and prevent marring surface 

    Telephone Protection RJ-11 In/Out connectors (2 telco cables included) 

    Two Always-on AC outlets 

    Includes security lock to prevent theft 

    20 Amp AC configured receptacles

Specifications

General Specs

Product Weight (lbs.)4.5
Depth (in.)4.75
Width (in.)10.25
Height (in.)2.5
Number Of Outlets2
Joule Rating1650
Cord Length (Ft)8
Manufacturer WarrantyLimited Lifetime
WarningProposition 65 Warning for California Residents