Paradyme

Paradyme

Hertz Mille MLK 16.503 Legend Car Audio Speakers System

Model #: MLK1650.3

At a Glance

The Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.

WarningProposition 65 Warning for California Residents
Hertz Mille MLK 16.503 Legend Car Audio Speakers System

General Specs

Impedance4
Woofer Size1.4
Car Speaker Size6.5
Mounting Hardware IncludedYes
Water ResistantNo
RMS Power Handling (Watts)150
Peak Power Rating (Watts)300
Shallow MountNo

General

Power Handling - Peak W300
Power Handling - Continuous W150
Impedance Ω4
Frequency response Hz40 ÷ 25k
Sensitivity dB SPL92
Voice coil Ø mm (in.)Woofer 36 (1.4) Tweeter 28 (1.1)
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)28 (1)
Woofer magnetNeodymium
Tweeter magnetNeodymium
Woofer conePressed-pulp cone with cotton fibres
Tweeter domeTetolon
Crossover type2 Way Passive Crossover
Crossover cut off2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF)

Hertz Mille MLK 16.503 Legend Car Audio Speakers System

Model #: MLK1650.3
299570
Model #: MLK1650.3
Hertz
$99,999.00

Request a Quote

At a Glance

The Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.

Get to know this product.

Through a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification.

Besides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound.

Power Handling - Peak W: 300

Power Handling - Continuous W: 150

Impedance Ω: 4

Specifications

General Specs

Impedance4
Woofer Size1.4
Car Speaker Size6.5
Mounting Hardware IncludedYes
Water ResistantNo
RMS Power Handling (Watts)150
Peak Power Rating (Watts)300
Shallow MountNo

General

Power Handling - Peak W300
Power Handling - Continuous W150
Impedance Ω4
Frequency response Hz40 ÷ 25k
Sensitivity dB SPL92
Voice coil Ø mm (in.)Woofer 36 (1.4) Tweeter 28 (1.1)
Woofer size mm (in.)165 (6.5)
Tweeter size mm (in.)28 (1)
Woofer magnetNeodymium
Tweeter magnetNeodymium
Woofer conePressed-pulp cone with cotton fibres
Tweeter domeTetolon
Crossover type2 Way Passive Crossover
Crossover cut off2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF)
WarningProposition 65 Warning for California Residents