Our Residential Showroom is now open on Saturdays from 10:00 AM - 5:00 PM. All other showrooms and departments are closed on Saturdays.
Schedule a Virtual Appointment
Paradyme

Paradyme

GoldenEar Technology® Invisa Signature Point Source (SPS) LCR Loudspeaker

Model #: Invisa Signature Point Source (SPS)

At a Glance

GoldenEar Technology® Invisa Signature Point Source (SPS) LCR Loudspeaker with a high velocity folded ribbon tweeter and a a special polystyrene film capacitor

WarningProposition 65 Warning for California Residents
GoldenEar Technology® Invisa Signature Point Source (SPS) LCR Loudspeaker

Construction

Driver Component Size5.25" x 4

Other

Sold AsEach

Specifications

Sensitivity92 dB
Frequency Response25 Hz – 35 kHz

General Specs

Product Weight (lbs.)14
RMS Power Handling (Watts)350
ColorWhite
Impedance8 ohms
Maximum Power Handling (Watts)350
Number of Speakers1
Depth (in.)3.25
Height (in.)27.56
Width (in.)7.94

GoldenEar Technology® Invisa Signature Point Source (SPS) LCR Loudspeaker

Model #: Invisa Signature Point Source (SPS)
191598
Model #: Invisa Signature Point Source (SPS)
GoldenEar Technology
$99,999.00

Available in Store Only

At a Glance

GoldenEar Technology® Invisa Signature Point Source (SPS) LCR Loudspeaker with a high velocity folded ribbon tweeter and a a special polystyrene film capacitor

Get to know this product.

The Invisa Signature Point Source is intended for use as a main front left, right or center channel loudspeaker, as well as a side or rear surround, in high quality multi-channel home theater and music systems, as well as in simpler two channel systems of the highest quality. It presents a compact 28-3/16” x 8-9/16” fascia, and, of course, is of a proper depth (3-1/4” without optional backbox, 3-3/4” with) to allow it to easily fit, into a standard wall depth. Each Invisa SPS incorporates four 5-1/4” high-definition cast basket drivers, which are very similar to those found in the award-winning Triton Reference. The Invisa SPS also incorporates an extraordinary Triton Reference High-Gauss, High Velocity Folded Ribbon Tweeter.  The complex crossover network utilizes the special fully balanced topology incorporated in our upper range models, with a special polystyrene film capacitor on the high frequency section. The drivers are wired with special wire which has a unique twist that was engineered for highest performance.The four 5-1/4” drivers are not identical, nor do they cover the same frequency range. In order to achieve a point source radiation pattern, with the dramatic benefits of better dispersion and improved imaging, the outer two drivers have their upper range limited to 500 Hz., while the two inner 5-1/4” drivers go all the way up to 3 kHz in order to meet and blend perfectly with the tweeter. All this is precisely accomplished by the complex balanced crossover network. Other small, but important details include: a switch to allow adjustment of the tweeter level, a magnetically attached low profile grille, non-resonant mineral-filled frame structure, special dogs to allow easy and secure attachment to the wall, and a rotatable tweeter to allow for correct orientation of the tweeter for vertical or horizontal positioning. There is a unique optional backbox available, that has been engineered with special EVA damping foam internally and open-cell foam externally to prevent bleed though of sound into the adjacent room.

Useful Documents
Specifications

General Specs

Product Weight (lbs.)14
RMS Power Handling (Watts)350
ColorWhite
Impedance8 ohms
Maximum Power Handling (Watts)350
Number of Speakers1
Depth (in.)3.25
Height (in.)27.56
Width (in.)7.94

Construction

Driver Component Size:5.25" x 4

Other

Sold As:Each

Specifications

Sensitivity:92 dB
Frequency Response:25 Hz – 35 kHz
WarningProposition 65 Warning for California Residents